Electric bike outruner motor stator winder WIND-HMW-1M

Electric bike outruner motor stator winder WIND-HMW-1M Advantages:

It takes 7 minutes for 2 pieces stator,around 130pcs/ shift (8hours)

Technical Data:

Stator Slots: No requirement

Stator Outer Diameter:198mm, 226mm,262mm 

Winding Way:

Armature Stack height:14-30mm

Wire Diameter: 0.3mm- 0.6mm

Number of Wires:1-13pcs

Air Source Pressure:0.4-0.7MPa

Power Supply Voltage:3 phases 380V±10% 50Hz

Power :about 3KW

Parameter:

Application: Suitable for the electric bicycle stator winding

Max wires numbers winding at one time: 13 pieces

Time for stator winding: 54 slots, 11 pieces wire for one time winding, including loading/unloading,

it takes 7 minutes for 2 pieces stator

Around 130pcs/ shift (8hours)

Composition:

Winding spindle servo motor: MITSUBISHI

Indexing servo motor: MITSUBISHI

Wire arraying displacment servo motor: MITSUBISHI

PLC: MITSUBISHI

HMI: WEINVIEW

Buttons: SCHNEIDER

Electric units: SCHNEIDER

Question and Answer:

1. How the winding machine do the indexing: manually or automatically?

Automatically with Mitubishi servo device

2. How the stator is fixed during winding process?

Put on the shaft and press with cover

3. What range of diameters of copper wire can work your machine (minimum and maximum)?

0.3mm to 0.51mm

4. Which is the range of stacking lengths the winding machine can work?

Standard wheel motor winding machine hub motor stator stack height 10mm~30mm,

20mm~50mm (custom made)

5. The winding process is automatic or manual?

Automatically with Mitubishi servo device

6. Is it possible to press and compact the wire copper during or after winding?

Compact the wire after winding process with a separate machine

7. Does the machine any limitation in the dimension of the width of the open slot

Min. Open slot width>1.8mm, in China hub motor winding slot open width usually is2mm, 3mm

8.What is the height of the machine on the work area of the operator?

750mm

9. Are there the machine any sensors to check if the wiring is correct (e.g. sensor to the check if the wire is broken)?

Machine pause and alarm if wire broken

10. Do you have machines to do the testing the wheel motor after winding?

Yes, separate testing machine

11. How you put the part on the machine before and after winding? It's a heavy wheel motor about 15 kg.

We didn't handle so heavy stator, Opearter load/unload staotr manually under 5KGS,

For example, a 198mm OD wheel motor stator weight around 2KGS

Contact:Shanghai Wind Automation Equipment Co.,Ltd

Email: emily@motor-machinery.com

Skype: motor.machinery

Mobile: +86-18067425780

Website: http://www.motor-machinery.com; http://www.coilswinding.com