BLDC Winding machine are mainly needle winding type for mutipole brushless motors,
According to your winding way, there are three machines for your choice,
WIND-3-TSM BLDC winding machine with three nozzle is widely used in 6 poles, 9 poles, 12 poles, 18 poles stators which are usually 3 phase motor with the 3 phase in same winding way,
the winding is fast during the WIND-TSM series, For example, a 6pole stator with 34SWG(0.234mm) , 435 turns, it cost around 2.5minutes/pc
WIND-2-TSM is a one nozzle winding machine, usually is can adapted to most of the segments stators, it is flexible and widely used among mutipole stators. For example, a 6pole stator with 34SWG(0.234mm) , 435 turns, wind slot by slot, it will cost around 7 minutes/pc
WIND-1-TSM don't array and displace winding, it just wind the wire at same place of the slot and don't move in slot, so if your stator field coils are with low filling rate , you can consider this machine type.
Pearl
Emily