CATEGORIES
- Motor machinery for Stator
- Motor machinery for Armature
- Motor machinery for Rotor
- Motor parts
- Heat treatment varnish Oven
- Induction cooker machinery
Latest news
- Machines for В-,S-,C-,O-,V-shaped arm
- The BRICs effect in worldwide
- The life of the armature winding machi
- Motor stator fly winder verses needle
- The famous type induction heater used
- Electromagnetic oven experiment
Contact us
- ADD: No.4 Building , No.1500, Kongjiang Road,Yangpu District,200093,Shanghai,China Skype: motor.machinery
- TEL: 86-21-58992293
- FAX: 86-21-58992292
- E-mail: sales@motor-machinery.com
> Motor machinery for Rotor
Riser commutator armature winding machine Armature winder for slot type commutator Vacuum cleaners hammers power tool WIND-ST-TD2B
- Slotted type armature winder
- Wire diameter: 0.20~1.2mm
- Slotted comm cross connection
- Max wire 1.35mm (AWG16)
- Product description: Armature winder for slotted type commutator armature,Vacuum cleaners hammers power tool Armature winder for slot type commutator,
PRODUCT INTRODUCTION
Slotted type commutator with or without risers commutator armature winding machine Slot type commutator rotor armature wider
WIND-ST-TD2B Advantages:
1. Slot type armature with thin, thick wire machine can handle,
Machine had good feedback of winding a 0.25mm wire diameter armature
2. Have good adaption for slot type commutator with groove,
No need to work with special designated slot machine
3. Got good feedback in wide application from customers
4. 98% yield rate above assured when the slot commutator quality is good
5. Till now it is the best machine in China for winding slot type armature
Straight stack Armature Winding Video:
Skew armature winder
Armature winder under commissioning
Slotted type armature winder tooling
Main data:
Wire diameter: 0.20~1.2mm
Armature diameter range:20~90mm
Armature stack length:10~130mm
Commutator diameter:8~60mm
Armature slot number:Odd, oven slot
Turns no.:0~99999
Flier fork speed:0~2000RPM
Indexing speed:0~2500RPM
Total power:4.5KW
Operation method:Step, Auto, JOG
Power source:AC380V 50/60Hz
Air source:5~7KG/cm2
Weight:850KGS
Dimension:1530mm x 1280 mm x 1650mm
Main configuration:
PLC: MITSUBISHI
Servo control system: Delta
Touch screen: MCGS7062KS
Pneumatic system: AIRTAC
Main electrical components:Korea and Japan
Tension :Hysteresis tension
Linear guide way: HIWIN
Safety door and feeding device: Pneumatic
WIND-ST-TD2B winding machine is to do winding for the armature with riser type commutator. It has double flyer to make the winding and with auto wire cutting, clamping structure, assisting wire inserting way to upgrade the winding speed.
Tags:
Slotted type commutator with and without risers winding,
hammer motor armature winding,
Contact: emily@motor-machinery.com
Skype: motor.machinery
Mobile: +86-18067425780
Website: http://www.motor-machinery.com; http://www.coilswinding.com
| Lap winding with double flyer wire gauge range | Usually 0.20~1.2mm, Max machine handled 1.35mm (about AWG16) |
| Armature commutator type | Slotted type riser type not hook type |
| Automatic or semi automatic |
You only need to load and unload armature, other actions such as hooking, winding, indexing and cutting are wound by machine automatcially
Wire size and Wire slot size(Length,width and depth), the wire slot should have enough space for the wire to stay inside Wire size 17AWG (1.15 mm), Slot: blade width 1.143, length=7.14 mm, depth= 5.95 mm and we think if the depth is bigger, the wire can acquire more space to stay inside slot, while depth is more, length is more too, 4.2 Could you please check if the commutator was pressed consistanctly each time at same location according armature stack? The push pin witness marks on the commutator are consistent. Because armature commutator and stack position is very important for indexing consistantly Fully automatic winding machine with Japan as the pioneer, the rising demand for high quality products and low labor cost, operator only need to ensure enough raw materials, and replace them in time without workpiece or copper wire, so that continuous production can be ensured. The number of shaft is usually high, so as to achieve high efficiency production. A machine with enough automation can meet the requirements of an employee handle two or three winding machines at the same time.
|
RELATED PRODUCTS
-
Rotor Aluminum casting m
The rotor production machine loading, working table rotation, ...
-
Rotor testing panel WIND
Aluminum die casting rotor testing machine Cast-aluminum roto...
-
Wheel motor winding mach
This wheel motor winding machine is designed for the electric ...
Pearl
Emily